+44 (0)24 7661 9267 Contact Us


Finance from only £50 per month!*

You have no items in your shopping cart.


Product image is only a representation, actual product appearance may differ slightly


Baileigh Industrial’s biggest all vertical ironworker is the SW-132.  This behemoth has 132 tons of punching and 179 tons of shearing and notching power.  It is also a dual operator machine, meaning two workers can work on opposite sides of the machine without a loss in power.  To achieve such power the SW-132 boasts a 220 Volt three phase 15 hp motor to power the industrial grade hydraulic system. The SW-132 is truly a workhorse and will be at home in any size shop.

The SW-132 is a five station ironworker with stations for punching, notching, flat bar shearing, angle shearing, and bar shearing.  Like most Baileigh Industrial hydraulic ironworkers the SW-132 uses the best design in the industry and uses vertical motion at each station. This type of machine eliminates the harsh snap in the punching station common on other brands. By eliminating the harsh snap the machine has less fatigue on it and the tooling lasts much longer.  The punching station on the SW-132 ironworker comes standard with seven sets of punches and dies as well as an oversized work table that has material stops and is scaled for easy setup.

The Baileigh Industrial SW-132 hydraulic ironworker was been designed and built to the highest quality standards in the industry.  No corners were cut; the frame is fully welded for rigidity and hydraulic clamps were added to the shearing station to hold everything in alignment. This eliminates any lifting of the material when shearing, extending blade life and providing a square sheared part. Other great features of the SW-132 are an electric back gauge, swing away stripper, oversized work tables, foot pedal operation, and waste buckets.

The SW-132 also has optional tooling such as press brakes, pipe notchers, channel and I-beam shears, and others are available. Call your friendly Baileigh Representative for more details.

Read More Read Less


Item Number SW-132
Country of Manufacture Taiwan
Round Bar Shear 45 mm
Rectangle Notcher W x D x T 50 mm x 90 mm x 12 mm
Single Vee Press Brake L x T 250 mm x 20 mm*
Punch Capacity 30 mm x 27 mm
Punching Pressure 120 Tons
Pipe Notching 114 mm*
Multi Vee Press Brake L x T 700 mm x 5 mm*
Throat Depth 406 mm
Vee Notcher Side x Side x T 105 mm x 105 mm x 15 mm*
Working Pressure 990 mm
Square Bar Shear 45 mm x 45 mm
Angle Shearing at 90° 152 mm x 152 mm x 15 mm
Angle Bending 102 mm x 13 mm*
Angle Flange Trim 100 mm
Blade Length 465 mm
Large V Notcher Side x Side x T 145 mm x 145 mm x 13 mm*
Max. Stroke Length 75 mm
Diameter x Thickness 50 mm x 16 mm
Cycles / Min. 30 @ 15 mm
Flat Bar Shearing 460 mm x 20 mm
Power 15 Hp – 220V 3-Phase
Shipping Dimensions (Inches) 2170 mm x 1120 mm x 2050 mm

* specifications subject to change without notice.

Hydraulic Steelworker (SW-132)

SKU: 2004584

Call for Availability

Call for Pricing
Financing starts at £591.00 . Contact Us for More information
SHARE PRINT Questions? +44 (0)24 7661 9267